Wireless Lodge Watch for 2-doors and/or windows (Includes door transmitter, circuit board and enclosed receiver)

This wireless energy monitor is designed to save money on energy costs by making sure your equipment isn’t running needlessly because a door or window has been left open The LW-2 detects when a door or window is left open for more than 2 minutes. The LW-2 then locks out the HVAC equipment until it detects the closure of the door or window for 2 minutes. This saves on energy costs, but also reduces short cycling of the HVAC equipment, reducing equipment icing, condensate pan overflow and wear in the equipment. Available for up to 4 doors and/or windows. Additional doors and/or windows can be added. Call for specifications on systems requiring more than 4 transmitters.

Lodge Watch Receiver Module is for indoor use and installation only.  For outdoor installation of the receiver module, make sure you specify our Lodge Watch systems in a water tight enclosure. LW1-WT, LW2-WT, LW3-WT, LW4-WT. Door/Window sensors are only for indoor use.  There are no door/window sensors available for outdoor use.


You must be logged in to order products online, click here to login


Coil Voltage: N/A

Color: N/A

Compliance: FCC, IC

Contact Rating: N/A

Input Voltage: 24 VAC

Line Voltage: N/A

Magnet Dimensions: 3.15 in x 0.47 in x 0.50 in (HWD)

Number of Transmitters: N/A

Operating Humidity: 5% to 95%, non-condensing

Operating Temperature: -30° to 140°F

Receiver Frequency: 902MHz

Receiver Module Dimensions: 4.75 in x 8.75 in x 2.25 in (HWD)

Relay Receiver: N/A

Sensor Dimensions: 3.15 in x 0.83 in x 0.59 in (HWD)

Trades Elite Exclusive: Y

Transmitter Power: Solar or CR1216 battery

Transmitter Transmission Range: 80 ft.

Warranty: N/A

Copyright 2013 - 2023 iO HVAC Controls.